The Vette Barn

The Vette Barn (https://www.thevettebarn.com/forums/index.php)
-   Off Topic (https://www.thevettebarn.com/forums/forumdisplay.php?f=38)
-   -   Did Aerovette build a deck? (https://www.thevettebarn.com/forums/showthread.php?t=122230)

JetMechZ16 04-06-2020 1:26pm

Did Aerovette build a deck?
 
1 Attachment(s)
Attachment 41664

DAB 04-06-2020 1:28pm

ah yes, the old disappearing wire trick...

JetMechZ16 04-06-2020 1:36pm

Quote:

Originally Posted by DAB (Post 1750388)
ah yes, the old disappearing wire trick...

Aero's very good at hiding electrical wiring. You should see his jumper cables.:yesnod:

Aerovette 04-06-2020 1:41pm

Easy fix. Cut and splice. Hell, there's a saw right there.

No need to take the boards off.

JetMechZ16 04-06-2020 1:45pm

1 Attachment(s)
Quote:

Originally Posted by aerovette (Post 1750393)
Easy fix. Cut and splice. Hell, there's a saw right there.

No need to take the boards off.

In celebration of you building your first deck Razzor has popped the cork on one of his finest bottles of wine for you.

Attachment 41666

DAB 04-06-2020 1:45pm

Quote:

Originally Posted by aerovette (Post 1750393)
Easy fix. Cut and splice. Hell, there's a saw right there.

No need to take the boards off.

that's the spirit! :rofl:

Bill 04-06-2020 1:59pm

"Measure twice, electrocute once."

Aerovette 04-06-2020 2:02pm

Quote:

Originally Posted by bill_daniels (Post 1750400)
"Measure twice, electrocute once."

https://i.imgflip.com/3vme1f.jpg

JetMechZ16 04-06-2020 2:04pm

1 Attachment(s)
The Dude was helping Aero build that deck and he's ready for a trip to MOAB now!!! Can't wait to hit the trails.

Attachment 41667

JetMechZ16 04-06-2020 2:10pm

1 Attachment(s)
To give you an idea of how long it took Aero to build this deck here's a pic of his now ex-wife maintaining the vehicles while he works.

Attachment 41668

Aerovette 04-06-2020 2:14pm

Quote:

Originally Posted by JetMechZ16 (Post 1750406)
To give you an idea of how long it took Aero to build this deck here's a pic of his now ex-wife maintaining the vehicles while he works.

https://www.thevettebarn.com/forums/...1&d=1586200212

You should have heard the neighbors laugh when she put those blue swans you see, in the front yard because she didn't like pink Flamingos?

z06psi 04-06-2020 2:22pm

Quote:

Originally Posted by JetMechZ16 (Post 1750387)

Where's the inflatable pool in the middle? :leaving:

JetMechZ16 04-06-2020 2:24pm

1 Attachment(s)
Razzor had to tell his wife there was a corkscrew attached to that Swiss Army knife she was using to open the wine. Lucky Razzor was in the Army to learn that.

Attachment 41669

z06psi 04-06-2020 3:18pm

Quote:

Originally Posted by JetMechZ16 (Post 1750413)
Razzor had to tell his wife there was a corkscrew attached to that Swiss Army knife she was using to open the wine. Lucky Razzor was in the Army to learn that.

Attachment 41669

Got one better.


When we first got married we had nothing. I came home from work and my new bride had fixed spaghetti. Well she wanted to add mushrooms to the sauce. We had no can opener.

She got it open with a crescent wrench and a butter knife.

The can looked like an aerovette project.

DAB 04-06-2020 3:42pm

pro tip: if you leave the cord plugged in, you'll know when you cut the ground, neutral and hot. :slap:

Cybercowboy 04-06-2020 3:50pm

Quote:

Originally Posted by JetMechZ16 (Post 1750395)
In celebration of you building your first deck Razzor has popped the cork on one of his finest bottles of wine for you.

Attachment 41666

Speaking of which, one of my pet peeves is when people open corked wine bottles without removing at least some of the foil first. It's not hard, pretty much every opener has a blade that allows for easy removal, and it a lot of instances you can just pull it right off. Seeing that ragged torn foil on an otherwise nice bottle of wine just sorta sets me off. If you do that, that's the last bottle you're opening until you repent your wine sins! :dixie:

Mick 04-06-2020 4:44pm

Quote:

Originally Posted by Cybercowboy (Post 1750445)
Speaking of which, one of my pet peeves is when people open corked wine bottles without removing at least some of the foil first. It's not hard, pretty much every opener has a blade that allows for easy removal, and it a lot of instances you can just pull it right off. Seeing that ragged torn foil on an otherwise nice bottle of wine just sorta sets me off. If you do that, that's the last bottle you're opening until you repent your wine sins! :dixie:

Whoa!!! Look out fellas! We got ourselves a connoisseur over here!

DAB 04-06-2020 4:49pm

Quote:

Originally Posted by Mick (Post 1750460)
Whoa!!! Look out fellas! We got ourselves a connoisseur over here!

bottle? well, ain't he all fancy! get a box, they hold more, and are cheaper per glass. :dance:

MadInNc 04-06-2020 4:50pm

Quote:

Originally Posted by Cybercowboy (Post 1750445)
Speaking of which, one of my pet peeves is when people open corked wine bottles without removing at least some of the foil first. It's not hard, pretty much every opener has a blade that allows for easy removal, and it a lot of instances you can just pull it right off. Seeing that ragged torn foil on an otherwise nice bottle of wine just sorta sets me off. If you do that, that's the last bottle you're opening until you repent your wine sins! :dixie:

I’ve same problem with Modello. Damn nOObs. :rofl:

Rodnok1 04-06-2020 4:54pm

Quote:

Originally Posted by aerovette (Post 1750393)
Easy fix. Cut and splice. Hell, there's a saw right there.

No need to take the boards off.

If your extension cords don't have 2 splices in them you're using them wrong anyways...
The real talent is cutting them on the first use... :dance:


All times are GMT -5. The time now is 8:16am.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Copyright © 2009 - 2024 The Vette Barn