What the fark is this? [tools]

[Sea Six]

Got a craftsman tool cabinet, upper and lower. Got a bunch of misc tools too.


There are a bunch of aluminum wrenches with a bunch of holes drilled in the handles, the likes of which I've never seen before. They have numbers like 16 and 20. Really big span like an inch or more. Weird angle of the head of the wrench with respect to the handle.


http://www.thevettebarn.com/forums/members/sea+six-albums-c10+1976-picture2419-image.jpg
:waiting:

[99 pewtercoupe]

They are for adjusting the flux capacitor in your DeLorean

[Fastguy]

AN fitting wrenches.

[StaticCling]

I believe those are AN Wrenches. :yesnod:

[StaticCling]

AN fitting wrenches.

Beat me! :Jeff '79:

[Fastguy]

They are fairly expensive, you should ebay those bad larrys.

[CertInsaneC5]

If'n you don't need 'em. Send them to me. :D

[Sea Six]

What would I need them for? Never seen them.

What are they worth?

[Sea Six]

Got:

(1) 3
(1) 6
(1) 8
(1) 10
(2) 12
(2) 16
(1) 20

All aluminum and weird colors. Buncha holes in each.

[Fastguy]

A set is over $200

[Norm]

Axle nut wrenches for motorcycles???

[Sea Six]

A set is over $200

Is the stuff I listed in the post above yours worth $200?

[CertInsaneC5]

A set is over $200

Dang it. SHHhhhhh you. :Jeff '79:

[Sea Six]

Fark.

Fark fark farkin' fark.


This here set's fer sale.


Offers?



:waiting:

[Y2Kvert4me]

What would I need them for? Never seen them.
I'm sure you've seen braided hose before, those aluminum end connectors are called AN fittings. Aluminum wrenches are used to not damage them.

4348

As for the numbers, hose/tube size is commonly expressed in x/16" values. For example, a -4 fitting is 4/16" or 1/4", -8 is 1/2", a -16 fitting is 1", -20 is 1 1/4". That is not the hex size, it is the tubing/hose trade size.

:cert:

[Sea Six]

Starting at $40.


Any takers?

Price includes shipping. For this and all other bids.

Looks like they are all *barely* used. Hard to say.


Total money-back satisfaction guarantee, provided you pay for return shipping.


:waiting:

[The_Dude]

I could probably use a couple of them. I'll go $40.

[Grey Ghost]

How much for the skinny jeans?

[Sea Six]

They're shrink-pressed-acid-washed-Dad soon-to-be jorts.


:seasix:



I have $40. Do I hear $50?


Looking at the wrenches, I can't tell that any but the -3 have been used.


:waiting:

[Sea Six]

Bump

[StaticCling]

I only have 6an fittings on my vette, so I don't need a set. But I remember that single 6an wrench from Summit was like 15 bucks?

I need a Fuel Sending Unit wrench, got one of those? :bigears:

[LATB]

How much for the skinny jeans?

If that's Clark in the pic...I can promise you they ain't skinny jeans. :Jeff '79:

[Bill]

They're shrink-pressed-acid-washed-Dad soon-to-be jorts.


:seasix:



I have $40. Do I hear $50?


Looking at the wrenches, I can't tell that any but the -3 have been used.


:waiting:

Oh, I'm sorry I was looking for the VB. I must have accidentally clicked on E-bay.

[Sea Six]

I only have 6an fittings on my vette, so I don't need a set. But I remember that single 6an wrench from Summit was like 15 bucks?

I need a Fuel Sending Unit wrench, got one of those? :bigears:

If the winning bid can part with the -6 I guess you can have it.

[Sea Six]

:ohnoes:

[Sea Six]

I could probably use a couple of them. I'll go $40.

Congrats!

They're yours! :cert:

:hurray:

[RedLS1GTO]

Son of a B.

Didn't see this until just now.

There is nothing but AN on the race car... and I need a new set. :banghead:

[Sea Six]

Snooze you lose

[Grey Ghost]

Crap. I would have paid triple what he is giving you :shots:

[Superstreet]

Son of a B.

Didn't see this until just now.

There is nothing but AN on the race car... and I need a new set. :banghead:

:iagree:


$45 :leaving:

[Bill]

Son of a B.

Didn't see this until just now.

There is nothing but AN on the race car... and I need a new set. :banghead:

Crap. I would have paid triple what he is giving you :shots:

:iagree:


$45 :leaving:

See if y'all can make a side deal with the winning buyer. If Clark hasn't mailed them yet, it should be a simple matter of the purchaser instructing Clark to mail them to a different address.

:bill_daniels:

[Sea Six]

So Dude- you get them funny-lookin' wrenches yet?

[The_Dude]

So Dude- you get them funny-lookin' wrenches yet?

Yes, I did. Thanks Clark! Did the check show up?

[Sea Six]

Haven't checked the mail box yet.

Everything look ok? Offer to refund in full if you're not happy still stands.

[The_Dude]

Haven't checked the mail box yet.

Everything look ok? Offer to refund in full if you're not happy still stands.
It's a nice set of wrenches. I don't know when I'll use the larger sizes, but I do have some 6 and 8 fittings on my Nova and a Mustang.
The wife did ask why I needed them. She should know better by now. :slap:
If the check didn't show up yesterday, it should be there today.

[RedLS1GTO]

It's a nice set of wrenches. I don't know when I'll use the larger sizes, but I do have some 6 and 8 fittings on my Nova and a Mustang.
The wife did ask why I needed them. She should know better by now. :slap:

If you don't need 'em, maybe we could make a deal on the larger ones... that's what I need most.

I have -16 and -20 fittings all over the f'n place on the race car.

[RedLS1GTO]

It's a nice set of wrenches. I don't know when I'll use the larger sizes, but I do have some 6 and 8 fittings on my Nova and a Mustang.
The wife did ask why I needed them. She should know better by now. :slap:

If you don't need 'em, maybe we could make a deal on the larger ones... that's what I need most.

I have -10, -12, -16, and -20 fittings all over the f'n place on the race car.

[Sea Six]

You can say THAT again. :shots:

[The_Dude]

If you don't need 'em, maybe we could make a deal on the larger ones... that's what I need most.

I have -10, -12, -16, and -20 fittings all over the f'n place on the race car.
I hate to break up the set, but then, I probably won't need the larger ones. Let me think about it.