Redneck fix it poll

[Grey Ghost]

The passenger side mirror assembly fell off of my DD truck. It was actually attached from the factory with double sided sticky tape :kick: I decided to try a heaping helping of JB Weld. If it doesn't hold...I'll order a replacement.

What is the best redneck fix it ?

[OddBall]

bolt that sucker down

[99 pewtercoupe]

Mirrors....we dont need no stinkin mirrors.....

[JRD77VET]

bolt that sucker down

Only if ther duct tape doesn't hold

[lspencer534]

WD-40.

[xXBUDXx]

Staples are the only acceptable option.

[marrepka]

Macgyver would use chewing gum and a paperclip.

[Ms.Gem]

Same thing happened with the Grand AM. I used JB weld about a year ago that suckers is still holding tight.

But you asked for red neck so I picked duct tape. :)

[marrepka]

This looks about right...

http://i524.photobucket.com/albums/cc329/marrepka/22623_zps8820001d.jpg

[Blademaker]

JB Weld..........Shit'll fix anything......

[lspencer534]

JB Weld..........Shit'll fix anything......

Not a carburetor crack on a 1954 Ford Golden Jubilee tractor....

[m and t's77]

http://www.weldingncutting.com/wp-content/uploads/2012/07/miller-welding-machine.jpg

[LisaJohn]

Just let the passenger hold it for you since it's on the passenger side.
Superglue should have been an option. It holds pinky fingers to ring fingers.

[99 pewtercoupe]

Just let the passenger hold it for you since it's on the passenger side.
Superglue should have been an option. It holds pinky fingers to ring fingers.

Also holds the odd bits that Spence attaches to Barbies

[Ms.Gem]

Also holds the odd bits that Spence attaches to Barbies

:rofl:Or breaks off....:rofl::leaving:

[Sea Six]

Fix-o-dent and forget it.

:seasix:

[DukeAllen]

Some kids broke off the mirror on a friends escort. I reattached it with duct tape.

I had the radio in my corvette repaired and they lost one of the screws that holds it into the console. The only one I could find around the house that fit was in my BBQ grille. It's a corvette screw now :D

Patched up a leaky pipe with cling film and duct tape once.

[DukeAllen]

Also holds the odd bits that Spence attaches to Barbies

I thought he'd use emory boards. Smooth out the holes he drills in them for le special time when nobody is home.:yesnod:

[xXBUDXx]

This thread has almost slowed my fapping.

[99 pewtercoupe]

This thread has almost slowed my fapping.

Wasnt sure that was even possible

[Grey Ghost]

This thread has almost slowed my fapping.

Just keep thinking about Spence's Barbies

[DukeAllen]

This thread has almost slowed my fapping.

This will speed you up.

http://therynoshorn.com/wp-content/uploads/2011/09/kingpin-landlady.jpg

If not, this is guaranteed.
http://www.the-top-list.com/wp-content/uploads/2012/04/ugly_2.jpg

Don't thank me. Just never shake my hand.

[Oh-yaa]

You left off "All the Above":lol:

[Stangkiller]

I've used JB Weld on a mirror before actually, it wasn't purty but it sure worked?

[xXBUDXx]

Just keep thinking about Spence's Barbies

This will speed you up.

http://therynoshorn.com/wp-content/uploads/2011/09/kingpin-landlady.jpg

If not, this is guaranteed.
http://www.the-top-list.com/wp-content/uploads/2012/04/ugly_2.jpg

Don't thank me. Just never shake my hand.

Nope, back to full speed. I may top 42 in the same day, again. :leaving:

[MEC5LADY]

Duct tape for the win and if that doesn't work drill some holes in the door and secure it with zip ties.:dance: Personally to show how classy I am I'd do both and make sure the duct tape was very decorative.

[xXBUDXx]

Duct tape for the win and if that doesn't work drill some holes in the door and secure it with zip ties.:dance: Personally to show how classy I am I'd do both and make sure the duct tape was very decorative.

You really do know how to talk dirty to a man.

[DukeAllen]

You really do know how to talk dirty to a man.

Now she just has to find one...

[Sea Six]

Duct tape for the win and if that doesn't work drill some holes in the door and secure it with zip ties.:dance: Personally to show how classy I am I'd do both and make sure the duct tape was very decorative.

I'm thinking the high speed tape they use on airplanes would add some bling. Kind of like the fake chrome look of some trim material.

[Grey Ghost]

Duct tape for the win and if that doesn't work drill some holes in the door and secure it with zip ties.:dance: Personally to show how classy I am I'd do both and make sure the duct tape was very decorative.

I forgot zip ties and wood screws !

[xXBUDXx]

Now she just has to find one...

I'm sure you can share some of your hunting grounds. :D

[Entropy]

I forgot zip ties and wood screws !
My suggestion. :lol:

[Yamma]

JB Weld will hold it for a little while. Eventually you will need to suck it up and just replace it though.

[DAB]

rednecks fix it for as little money spent as possible, and if it fails, they fix again, often the same way as the failed first fix.

ballers just buy a new one, and give the busted thing to a redneck, who will fix it for as little money spent as possible....

[Grey Ghost]

JB Weld will hold it for a little while. Eventually you will need to suck it up and just replace it though.

I guess, it really is just a temporary experiment. I used half of the JB Weld on it. The driver side broke a few yrs. ago and I got a new one pretty cheap from rockauto.com. Funny that most old cars never even had a pass. side mirror.

Just checked RA. $8-$12 for the entire assembly :leaving:
I think I spent $8 on JB Weld

[DukeAllen]

I'm sure you can share some of your hunting grounds. :D

I'm taken...and straight. But thanks for your interest, we'll keep it on file.

[Bill]

Not a carburetor crack on a 1954 Ford Golden Jubilee tractor....


You just didn't work hard enough at it.......you have to apply yourself to the task.

[lspencer534]

You just didn't work hard enough at it.......you have to apply yourself to the task.

Are you saying I need to get intimate with the carb...?

[MEC5LADY]

I guess, it really is just a temporary experiment. I used half of the JB Weld on it. The driver side broke a few yrs. ago and I got a new one pretty cheap from rockauto.com. Funny that most old cars never even had a pass. side mirror.

Just checked RA. $8-$12 for the entire assembly :leaving:
I think I spent $8 on JB Weld

:rolleyes: It's not about the money it's about the adventure and the drive to win despite the odds using items on hand without thought to rational.

[ApexOversteer]

I need to clarify my vote... Camouflage Duct Tape.

[ApexOversteer]

You know, 'cause then you can't see the repair.