FS: C5/C6 front & rear Baer EradiSpeed-Plus-2 Brake Rotor rotors

[nedih rotaredom]

Nlfs

[DropTheTop]

I have front & rear Baer EradiSpeed-Plus-2 Brake Rotor rotors 13.35" & 14" with intermediate brackets to clear the 2 plus rotors. This kit is around $1,300new......
P/N 2301053 & 2301021

About 18K miles on them

$800 for all 4 + shipping

These are in VG shape.
Page 1 below has some pics:

Corvette photos | Corvette pics - 2000 vert - Powered by PhotoPost (http://forums.corvetteforum.com/photopost/showgallery.php/cat/1432)

http://www.ecklers.com/images/vette/48545.jpg

http://static.summitracing.com/global/images/prod/large/bae-2612007_w.jpg

Only reason I am selling.................I can't use my 17" wheels or a few of my 18" ones for racing.
PM with any questions.
Thanks,
Steve

So do the wheels have to be 18" and 19" to use these?

[nedih rotaredom]

18" will work with the right offset..........I have run my Topline 5 spoke Y2K chrome repos 18 x 10.5 +58mm offset wheels w/o issue on the back.
"thegreenman" has them now for his C6.........we test fit them in the driveway before he would buy them..........the nerve!
The fronts need to be a 18 x 9.5 with around +58mm for a big brake kit.
OR
Buy my HRE wheels & tires and I guarantee they will fit :takdir:

[DropTheTop]

18" will work with the right offset..........I have run my Topline 5 spoke Y2K chrome repos 18 x 10.5 +58mm offset wheels w/o issue on the back.
"thegreenman" has them now for his C6.........we test fit them in the driveway before he would buy them..........the nerve!
The fronts need to be a 18 x 9.5 with around +58mm for a big brake kit.
OR
Buy my HRE wheels & tires and I guarantee they will fit :takdir:

Aren't they selling with the car? :question:

[nedih rotaredom]

Aren't they selling with the car? :question:
Not if I sell them...........$3800 for tires, wheels tps sensors (1997-00) and the 4 rotors!

[Culookin]

18" will work with the right offset..........I have run my Topline 5 spoke Y2K chrome repos 18 x 10.5 +58mm offset wheels w/o issue on the back.



I've run the same setup on the C5 with the stock thinspokes and 0 issues. Nice little brake package for those not wanting to drop 5-7 grand on a BBK!

[Toque]

Nice brake setup ! I have the same set !
TTT for you !

The rear 14" will work on my Stock 18" Z06 Rim. There is about 1/4" or more of a gap between rim and caliper. (see pic below)

The front 13.35" is way too close to the inner wheel of my stock 17" rim. :cry:

http://mysite.verizon.net/res0aae8/baer/baer25.jpg

It all fits great on my 19/19 CCW setup. ;)

http://mysite.verizon.net/res0aae8/z06/zzz19.jpg
http://mysite.verizon.net/res0aae8/z06/zzz34.jpg

Toque

[YELLOHH]

I'm interested in the rears if you are willing to separate, or if anyone else is interested in the fronts only.

[nedih rotaredom]

I'm interested in the rears if you are willing to separate, or if anyone else is interested in the fronts only.

Greg,
I can do........$350 + shipping. PM for discussion if ya want.
Thanks,
Steve

[allthrottleandsomebottle]

The rears are off!
Better pics to come of the rears, but they are 14"........
Also shows the brackets/fastners used to get 14" rear rotors to work!

http://forums.corvetteforum.com/photopost/direct_data/1432/rotors_vettes_009.JPG

http://forums.corvetteforum.com/photopost/direct_data/1432/rotors_vettes_010.JPG

http://forums.corvetteforum.com/photopost/direct_data/1432/rotors_vettes_011.JPG

http://forums.corvetteforum.com/photopost/direct_data/1432/rotors_vettes_012.JPG

http://forums.corvetteforum.com/photopost/direct_data/1432/rotors_vettes_013.JPG

[allthrottleandsomebottle]

Everything for the rears cleaned-up:
http://forums.corvetteforum.com/photopost/direct_data/1432/rotors_011.JPG

http://forums.corvetteforum.com/photopost/direct_data/1432/rotors_008.JPG

http://forums.corvetteforum.com/photopost/direct_data/1432/rotors_006.JPG