PDA

View Full Version : Electrical question.

kingpin
02-13-2013, 8:12pm
I have this transformer for sale.
I really have no idea anything about it and someone sent me a message asking this:

does this Transform 600v to 200v 3 phase? I have 600v 3 phase and I need to bring to 200v 3 phase.

Here is a picture of the label on the transformer.

http://i111.photobucket.com/albums/n130/kingpin111/T2eC16FzcE9s4g0uI2BQr5DhKpg48_20_zps7c13ebe4.jpg
Jeff '79
02-13-2013, 8:14pm
Spence to the white courtesy phone....

btw.. I wonder how the dryer install went...:waiting:
lspencer534
02-13-2013, 8:21pm
Spence to the white courtesy phone....

btw.. I wonder how the dryer install went...:waiting:

The dryer install was a breeze. I researched it as much as I could and got lucky by buying the correct fitting and length ahead of time. I little pipe dope, two wrenches, turned on the gas, no leaks, started the dryer (self-lighting pilot), and my kid loves it! Particularly the feature of the dryer that keeps fluffing the clothes to keep them from wrinkling. Thanks for asking!

Now, to answer the OP: I clearly see a "600" and a "200" on that label. That must mean something, which is obviously that it converts 600v 3 phase to 200v 3 phase. It likely can do the reverse also. I doubt that it does long division though.
kingpin
02-13-2013, 8:24pm
The dryer install was a breeze. I researched it as much as I could and got lucky by buying the correct fitting and length ahead of time. I little pipe dope, two wrenches, turned on the gas, no leaks, started the dryer (self-lighting pilot), and my kid loves it! Particularly the feature of the dryer that keeps fluffing the clothes to keep them from wrinkling. Thanks for asking!

Now, to answer the OP: I clearly see a "600" and a "200" on that label. That must mean something, which is obviously that it converts 600v 3 phase to 200v 3 phase. It likely can do the reverse also. I doubt that it does long division though.

Listen I'm proud of you and was one of the people backing you up on the dryer install.
But on this I'm going to have to wait it out. :D
Blademaker
02-13-2013, 8:24pm
Electricity: You can't see it, it'll shock you, don't fvck with it.

'Bout all I know.......
Jeff '79
02-13-2013, 8:29pm
Listen I'm proud of you and was one of the people backing you up on the dryer install.
But on this I'm going to have to wait it out. :D

:rofl::rofl:
ZipZap
02-13-2013, 8:34pm
Most can operate either way, step-up or step-down. As long as the correct voltage is applied to the correct windings it should work fine. The kva rating on that one is really low for most applications. Also, I'm wondering where somebody has access to 600v three phase that isn't stepped up from either 240v or 480v. Why doesn't this person just go to the source? Maybe it's a Canada thing?
xXBUDXx
02-13-2013, 8:35pm
It appears to be a 600 volt primary, 220 volt secondary transformer. 3 phase.

600 volts in, 220 volts out (simplified explanation)

This transformer will meet his voltage requirements. I can't tell you if it meets his current (amp) requirements because I do not know what type of load he is using it for.

Hopefully this helps. :cert:
lspencer534
02-13-2013, 8:42pm
Listen I'm proud of you and was one of the people backing you up on the dryer install.
But on this I'm going to have to wait it out. :D

I remember your support, and I appreciate it! :cert:

On the other part of your post...you are a wise man....:leaving:
kingpin
02-13-2013, 8:46pm
Most can operate either way, step-up or step-down. As long as the correct voltage is applied to the correct windings it should work fine. The kva rating on that one is really low for most applications. Also, I'm wondering where somebody has access to 600v three phase that isn't stepped up from either 240v or 480v. Why doesn't this person just go to the source? Maybe it's a Canada thing?

I couldn't answer your question. My electrical expertise is only in outlets and switches.

It appears to be a 600 volt primary, 220 volt secondary transformer. 3 phase.

600 volts in, 220 volts out (simplified explanation)

This transformer will meet his voltage requirements. I can't tell you if it meets his current (amp) requirements because I do not know what type of load he is using it for.

Hopefully this helps. :cert:

Thanks Bart. I'll ask him and see if he knows.
Grey Ghost
02-13-2013, 9:17pm
Isn't this the config. diagram ?

http://i48.photobucket.com/albums/f229/jerryholmes/T2eC16FzcE9s4g0uI2BQr5DhKpg48_20_zps7c13ebe4.jpg
kingpin
02-13-2013, 9:37pm
Isn't this the config. diagram ?

http://i48.photobucket.com/albums/f229/jerryholmes/T2eC16FzcE9s4g0uI2BQr5DhKpg48_20_zps7c13ebe4.jpg

:bilmem:

All as I know is the transformer was hooked up to a saw that required 3 phase power.
Grey Ghost
02-13-2013, 9:42pm
His question about 200v 3phase...sounds weird...What would you need 200 for ?
kingpin
02-13-2013, 9:50pm
His question about 200v 3phase...sounds weird...What would you need 200 for ?

I don't know but if I can get rid of this 150lb paper weight I'd be happy.
Grey Ghost
02-13-2013, 10:02pm
Could be for a motor...call the phone # on the panel tomorrow for support.
Montehall
02-13-2013, 10:35pm
just leave it in a room full of florescent lights, with the contacts un-bridged. Ask your supervisor to pick it for you.
instant promotion.

we had similar transformers in our Tube-Type LORAN transmitters. Gotta be careful with them.
Also, I'm not really up on Canadian environmental regs, but depending on the age of the transformer, it might contain PCBs.