thegreenman
03-21-2010, 3:50pm
I am thinking about installing a catch can to capture any oil that might come out of my valve covers, don’t expect any but just to make sure. Right now I have one valve cover connected to vacuum after the TB (per MagnaChargers instructions) and the second valve cover I installed a breather as a temporary solution. I am thinking about connecting both valve covers to the same vacuum source with a catch can between the covers and vacuum. I don’t have a line coming out of my intake manifold due to my TVS 1900.
I would rater pull the fumes out then vent, I believe it will keep the oil a little cleaner.
Any thoughts on this setup?
I would rater pull the fumes out then vent, I believe it will keep the oil a little cleaner.
Any thoughts on this setup?