PDA

View Full Version : Need Some Measurements ... !


Kuelblaz
07-27-2011, 5:12pm
Can anyone provide the C6 frame width at the doors, outer to outer, and the rail width? Gotta make a cradle to haul a frame/rear tub ... Thanks!!

wwomanC6
07-27-2011, 6:03pm
width at the doors - just under 6 feet approx 70 to 71inches

Inner length from wheel to wheel about 7 feet. If you don't need the numbers tonight, we can measure mine tomorrow to get more specific numbers for the area you need.

:squirrelrun:

Kuelblaz
07-27-2011, 7:34pm
width at the doors - just under 6 feet approx 70 to 71inches

Inner length from wheel to wheel about 7 feet. If you don't need the numbers tonight, we can measure mine tomorrow to get more specific numbers for the area you need.

:squirrelrun:

That works ... Ill throw a tape measure in the car ... Thanks!!

:cheers:

73sbVert
07-27-2011, 8:02pm
That works ... Ill throw a tape measure in the car ... Thanks!!

:cheers:

Throw in some string and a couple of nuts and tape too, make plumb bobs to get true vertical points at which to measure.

:D