I'm just going to get to the point

[GEODON]

can you use super glue to stick the vettes front emblem back onto the tape? Or will this cause some major problems down the road?

[Uri]

.................Carefully if you have to.

Use the gel type.

[GEODON]

.................Carefully if you have to.

Use the gel type.

thanks man. :cheers:

[Uri]

Don't go out there 'toasted" and try to do it..... :shots:

[Vet4jdc]

can you use super glue to stick the vettes front emblem back onto the tape? Or will this cause some major problems down the road?

you could use a little but of silicone and then you can get it off later if you need to....not too much! :)

[lander]

Just get new tape and do it right the first time.

[mrvette]

Just get new tape and do it right the first time.

Carefully clean off all tape residue with alky or gasoline.....

then use RTV/silicone seal to restick the emblem....lasts for over ten years....

in fact I have never had any emblem come off using that stuff....

:hurray:

[WalkerInTN]

Just get new tape and do it right the first time.

:iagree: This. They sell the double sided foam 3M tape at all hardware & auto parts stores. Clean the old crap off the emblem, & stick the new tape on. Trim to fit with a razor blade, & stick the emblem back on the car. :cheers:

[Mike Mercury]

Don't go out there 'toasted" and try to do it.....

http://1.bp.blogspot.com/_ZqDXv_U_Qng/SdW_GefUMqI/AAAAAAAAAJA/oiYTJ4UxG3o/s400/drunk-dude-picture-1.png

[Joecooool]

Lining it up is the bigger issue. Had a hell of a time with the logo when I bought the Tiger Shark nose.

[Kerrmudgeon]

In my experience crazy glues dry out fast and fails. I'd use double sided auto trim tape. That stuff sticks like poop to the blanky! :thumbs:

[ft laud mike]

NO, you have it all wrong
JB weld, FTW!
:cheers:

[onedef92]

Use that there 3M Emblem Adhesive. You can find it at any auto parts store.