The Vararam kit should include bandaids ! [Archive]

View Full Version : The Vararam kit should include bandaids !

Eagleeye

01-22-2010, 10:22pm

Any of you that have done the C5 kit probably knows exactly what I mean.... especially if you did it on the floor. I thought it was of marginal/flimsly quality but that actually helped the install. I took "pot luck" and didn't order an airbridge as I already had a carbon fiber one. It was about 3/4 inch too long and out came the hacksaw ! All is good...Still have to reinstall lower airdam and oil the filter. They suggest WD-40 as the preferred oil - go figure ! Will go do the computer learn thing tomorrow , after my bleeding stops.

wwomanC6

01-23-2010, 8:03am

We don't get to use this smiley much, but its appropriate for this tread!:chainsaw:

Sneaks

01-23-2010, 8:08am

We don't get to use this smiley much, but its appropriate for this tread!:chainsaw:

Nice! :roll:
I went with the Vortex Rammer. Love it! :thumbs:

Munch

01-23-2010, 9:16am

Mine was already on when I got the car! :hurray:

DropTheTop

01-23-2010, 9:33am

I was one of the lucky ones that it fit perfect on. Apparently some motors are scootched forward a bit, and that's why they seem too long for some applications. Either way, here's to one of the best air intakes out there! :cheers:

WKMCD

01-24-2010, 11:31am

I can give you a few tips... :yesnod:

http://i54.photobucket.com/albums/g93/WKMCD/bleedinghands.jpg

Sneaks

01-24-2010, 1:13pm

I can give you a few tips... :yesnod:

http://i54.photobucket.com/albums/g93/WKMCD/bleedinghands.jpg

You been trying to bust head bolts loose again buddy? :dance:
:D

Eagleeye

01-24-2010, 2:38pm

Got it all together and followed the relearn instructions. Took it out after church and did a couple of I64 ramps and...WOW...this was one of those mods that I could actually feel ! Had the same feeling of a 50hp shot, especially for me pulling from about 3000 up. Too much traffic to take to the limiter above 1-2 and 3rd. 65 degrees made for a nice outing....