LS1 swap out

[Tulsa Vette Guy]

i am looking to swap out my LS1 intake for an LS6 intake. what (besides the LS6 intake manifold) would i need to complete this installation?

[Y2Kvert4me]

Your 2002 came stock with the LS6 intake manifold.


:cheers:

[Tulsa Vette Guy]

Your 2002 came stock with the LS6 intake manifold.


:cheers:

Are you sure ?? How can I tell.? Thanks for the reply.

[Y2Kvert4me]

Are you sure ?? How can I tell.? Thanks for the reply.Only way you can tell for sure would be to pull the intake and look at the underside. The LS6 is flat, the early LS1 are concave to accommodate the small coolant crossover lines that ran beneath the intake.
These coolant lines were revised for the newer intake, using only a crossover tube in the front ports on the heads, the rear ports are blocked off.

2001-2004 all used the same intake manifold. It's only called the "LS6" intake because 2001 was the first year for the LS6 too.

It's a good upgrade for 97-00 LS1s...but in your case, all you'd be doing is swapping identical parts.


:cheers:

[Tulsa Vette Guy]

Your 2002 came stock with the LS6 intake manifold.


:cheers:

Thanks, This is Great to know, And Thank you for your knowledge.