PDA

View Full Version : Add SuperCharger change plugs


thegreenman
11-29-2009, 8:33pm
Hey all,

I added a SuperCharger to my Vette a few months ago and lately it seemed to be knocking when I come down on it around 100 MPH or so, smooths out over 100. Also, lately it didn't want to idle when cold.

Today I changed my spark plugs and wires, gaped at .035 and took it for a spin. Made a big difference, idles smoother and just barely noticed any knock at 100MPH (meth kit will fix this). I should have changed these months ago, duh. I thought the stock gap was around .040 so I was in no hurry, it must have been more than .060. Also, a couple of my plugs were wet, must not of been getting full spark.

Just a heads up, if you add a SC, change and gap your plugs.

wwomanC6
11-29-2009, 11:30pm
Good to know. Thanks for the info. :squirrel: